Tag Archives: Tutorial

DIY Reindeer Ornament from Monique of Farm House Quilts

Our friend Monique from Farm House Quilts has generously agreed to be our guest blogger this week.  She has prepared this super cute Reindeer Ornament DIY for you.  Visit Monique’s online store at www.zibbet.com/farmhousequilts.

This would be a fun craft to do with the kids or for your neighborhood ornament exchange.  Have fun with it and get your creative on!

Here’s what you will need:

004

  • gluegun
  • three flat old fashioned clothespins
  • 2 googly eyes
  • 1 small red pompom
  • a piece of ribbon

Step 1:  Turn the clothespin upside down and glue the eyes and nose as shown.

005

Step 2:  Glue the two unused clothespins together.

006    007

Step 3:  Glue the “head” to the “body”.

008

Step 4:  Take a length of ribbon and make into a bow.

011    012

Step 5:  Glue the bow to the neck as shown.

015

Your reindeer is now ready to “sit” on any branch of your Christmas tree!

Happy holidays!

DIY Christmas Ornament From Repurposed Measuring Stick

I love old wood yard & meter sticks.  They used to be given away free as marketing materials and now they average around $8 each at antique stores.  I decided to make a Christmas ornament out of one of the old folded measuring sticks that has been hanging around my workshop for a while.  You could make this ornament using an old ruler you have hanging around as well.

Before we get started we’d like to thank Tracy Spisak, photographer extraordinaire from Gallery Portaiture (www.galleryportraitureinc.com) for photographing this DIY project!

This is what you’ll need:

DSC_0119

  • Measuring stick or ruler cut to the size you’d like
  • Letters from your local craft store
  • Jump rings
  • Ribbon
  • 2 pairs of pliers
  • E6000 or Tacky Glue
  • Seasonal buttons or decoration

1.  Choose the festive word that you’d like to spell and drill corresponding holes in the bottom of the measuring stick to hang the letters from.  Then drill a hole in the top left hand and right hand corners to string the ribbon through.

2.  Run the jump ring through the hole in the top of the letter and the hole in your measuring stick.  To open and close your jump ring grasp it with a pair of pliers on each side of the split.  Then twist in opposite directions – basically one hand should be going towards you and the other away.  Never pry the jump ring directly apart horizontally.  Attach all of your letters.

DSC_0120 DSC_0123

3.  Cut a piece of ribbon about a foot long.  Run one end of the ribbon through the right upper hole and one through the left upper hole on your measuring stick.  Knot the ends of the ribbon and trim the ends.

DSC_0127 DSC_0130

4.  I added a silver glittery button to the ornament to give it some sparkle.  You could add anything that catches your eye.  I also tied a knot in the upper part of the ribbon for a little extra flair.

DSC_0132

5.  Show off your crafty skills all your friends!

DSC_0133

If you aren’t up to making your own ornament check out our website (www.hangupsinkc.com) to check out what our creations.  They make great teachers and hostess gifts!

Happy Thanksgiving!

Polymer Clay Charms

DIY Polymer Clay Pendants

Are you looking for something to do with your kids this summer?  This project is one of my favorites and is perfect to do with kids. Its fun to play with the clay and the supplies you need are easy to find as well as affordable.  You bake the clay in your own oven, and some items you may already have in your house.
Supplies Needed

Supplies Needed

What you will need:

  • Polymer Clay – I use Sculpey which you can find at most craft stores in a variety of colors. Any brand of polymer clay will work.
  • Studio by Sculpey Antiquing Medium – If you want to add color to your piece once it is baked. I like the chocolate brown color the best.
  • Studio by Sculpey Satin Glaze – This is a clear glaze that goes onto the piece at the end to protect it and seal it. They also make a gloss if you prefer that.
  • Rubber Stamps – these can be wood block or clear, it really does not matter. You can also use anything with a texture that can be pressed into the clay.
  • A spray bottle with water – I use an old windex bottle but any type of squirt bottle will work.
  • Scrap Paper – Any type of white paper will work, I use scrap paper from my office or old homework sheets from the kids.
  • Paint Brush(es) – I find it easiest to use smaller brushes to apply the antiquing medium and satin glaze.
  • A Wood Barbeque Skewer – Or anything that will make a hole in the clay so you can add a jump ring or put some sort of stringing material into it. You will want your hole to be at least a 1/16 inch and I find these bamboo skewers work best for me.
  • Small bowls or cups – for water and to put your antiquing medium and satin glass into while you work with it. You can use just about anything that you have around.

Step 1 – Pull a piece of clay from your package. The clay is marked in bars and I usually pull out one of those bars and start working with that. Whether your clay is soft or not you will want to work with it for a good 15 minutes. Knead it, fold it, roll it, flatten it, roll it again. This is what cures the clay and gives it strength. If you do not work with your clay then it may be brittle and/or break after it is baked. A good test to see if your clay is ready is to flatten out a piece to about 1/8” and if you see any cracks around the edges you will need to work with it some more, if not it should be ready to go. If the clay is really dry you can add a bit of water to it and work it in slowly.

Shaped Clay Ready to be Stamped

Shaped Clay Ready to be Stamped

Step 2 – Decide how big you want your piece to be and pull off a piece of your clay, shape it and flatten it to approximately 1/8” thick. I don’t like to go much thinner than this so the piece is strong. You can roll it out with a roller and cut a shape if you want but I like to organic look of shaping it myself. I will sometimes use the back of a stamp block to flatten it so it is a nice clean flat surface.

Place Clay Onto Stamp

Place clay onto stamp that has been spritzed with water

Press Down Firmly to Make the Impression

Press down firmly to make the impression

Step 3 – Pick a stamp or other textured item to imprint into the clay. Spray it will a spritz of water from your spray bottle. This helps to keep the clay from sticking to the stamp. Place your stamp so the impression size is face up and place your clay where you want the image to be. Using the other stamp or your hand press down firmly on the clay without flattening it out completely. Pull your clay from the stamp and take a look at it. If the image is not even or you don’t like it then just scrunch up your clay and try again. This is the best part of this project, if you don’t like what you see you can just scrunch up the clay and try again until you get something you like.

Using Skewer Make a Hole at the Top

Using a skewer make a hole at the top of your piece

Step 4 – Using your skewer or other tool make a hole in your piece where you can either put a jump ring or run a string through it to hang it. Be mindful of not getting too close to the edge. After you make your hole look at the back of the piece and flatten out any clay that may have been pushed through with the skewer.

Place Clay on Paper on a Cookie Sheet

Place clay on a sheet of paper onto a cookie sheet

Step 5 – Place your clay piece on a sheet of paper on a cookie sheet. Follow the baking directions on the clay you purchased. For the Sculpey they suggest 275° for 15 minutes per 1/4 inch of clay. My pieces are usually closer to 1/8 inch and this time works fine for me.

Step 6 – Let your clay cool completely

Brush on Antiquing Medium with Water to fill in Impressions

Brush on antiquing medium with water to fill in impressions

Step 7 – If you choose to add the antiquing medium to your clay now is the time to do it. Simply put a small bit of the antiquing medium in a bowl and also have a bowl of water ready. Dip your paint brush into the water and then put a small amount of the antiquing medium on it. Then paint over your piece. The idea is that the color will go down into the impressions made on the clay. If you have too much color then add some water to your brush and go over your piece again. This is another time you can play with how you want it to look. If you don’t like what you have done you can wash it off, dry off the piece and try again. Once this is dry you can do the same to the back of the piece if you want or leave it as is.

Cover Clay with Satin Glaze After Antiquing Medium is Dry

Cover clay with satin glaze after antiquing medium is dry

Step 8 – Using a clean dry paint brush put some of the satin glaze into a bowl and then using your brush apply to the front of your piece. It is clear and may bubble up a little but these will disappear as it dries. Let it dry completely and then do the back of your piece also. You want to be sure that all sides are covered with the glaze so the piece is sealed.  Let it dry completely. (takes about 20 minutes to dry completely).

Proud of her new necklace she made all on her own.

Proud of her new necklace she made all on her own.

 

Some of the pieces we made today. Some are finished, others are waiting to be added to other pieces. Gotta love the mustache necklace my daughter made.

Some of the pieces we made today. Gotta love the mustache necklace my daughter made.

That’s it, you are done, except for hanging it. You can hang it on a cord or a chain or whatever you have handy. I put a jump ring through mine and then put them on a suede cord (you can find these at most craft stores also.

Happy Creating from Hang Ups in KC!